Illustration of an outdoor heat pump on a raised stand beside a brick and limestone home in autumn.
14
Oct

Ontario Heat Pump Rebates 2026: Up to $7,500 for Kingston Homeowners

Updated October 14, 2026

Kingston homeowners considering a heat pump installation may qualify for up to $7,500 in rebates through Ontario’s Home Renovation Savings program.

The program offers incentives for eligible cold-climate heat pumps, helping homeowners replace older heating systems with energy-efficient heating and air conditioning.

Kyro Mechanical is a participating contractor in Ontario’s Home Renovation Savings program. We handle rebate applications for our customers, including the required pre-installation approval and post-installation paperwork. You’ll need to provide the necessary information and sign the required documents.

If you’re planning an installation before the end of 2026, allow time for the application process. Pre-approval is mandatory. Kyro is targeting November 30, 2026 for qualifying installations; this is our scheduling target, not a confirmed program deadline.

How much is Ontario’s heat pump rebate in 2026?

Your home’s existing primary heating source determines which Home Renovation Savings rebate category applies.

Existing heating source Available rebate for a qualifying cold-climate air-source heat pump
Purchased system: electricity, oil, propane or wood $1,250 per eligible ton, up to $7,500
Purchased system: Enbridge natural gas $500 per eligible ton, up to $2,000
Rented heat pump systems $500 per eligible ton, up to $2,000

These are maximum rebate amounts, not guaranteed payments for every installation. Your rebate depends on the qualifying heating capacity of the equipment you choose.

How is the rebate calculated?

The program calculates cold-climate air-source rebates using the equipment’s rated heating capacity at 8.3°C (47°F), subject to its capacity rules and rebate cap. This capacity may differ from the equipment’s advertised nominal size.

For example, a purchased qualifying heat pump with an eligible rated heating capacity of 3.2 tons could receive:

  • $4,000 for a home primarily heated with propane, oil, electricity or wood.
  • $1,600 for an eligible Enbridge natural gas-heated home.

These figures illustrate the calculation only. Final rebates depend on the equipment, installation and program approval.

Qualifying ground-source heat pumps have separate incentive amounts and requirements.

See the official Ontario heat pump rebate amounts and eligibility requirements.

How does Kyro Mechanical handle the rebate application?

Kyro Mechanical is registered as a participating contractor in the Home Renovation Savings program and handles the application paperwork for customers. You don’t have to manage the provincial application on your own.

1. Contact Kyro about your heating system

Tell us about your home, its current heating source and what you’re considering replacing.

We’ll discuss your heating and cooling needs and the heat pump options that may suit your property.

2. Review the equipment and rebate eligibility

The proposed heat pump must meet the program’s efficiency, capacity and equipment requirements. Your home’s existing heating source determines which rebate category applies.

Kyro can help review these requirements while planning your installation.

3. Complete the application documents

Kyro handles the pre-installation application. You’ll provide the required information and sign the necessary documents.

The pre-installation submission includes an itemized work order, photographs of your existing heating equipment and nameplates, a signed Participant Agreement and the completed NRCan sizing and selection documentation. The administrators may request additional information.

Homes heated with oil or propane also require a signed tank-removal attestation form.

4. Wait for pre-installation approval

The rebate must be approved before the heat pump is installed.

Installing the equipment before receiving written approval makes the installation ineligible for the rebate.

5. Complete the installation

Once the application is approved, the qualifying heat pump installation can proceed. The equipment and installation must match the approved program requirements.

6. Submit the final documentation

After installation, Kyro handles the required post-installation application, which the contractor must submit within 30 days of installation.

The program requires an itemized final invoice or signed rental agreement, photographs of the installed equipment and thermostat, and installation details.

Once the final application is approved, the rebate cheque is expected to arrive by mail within approximately 60 days.

The rebate is paid after installation and final approval, so homeowners should plan for the initial project cost rather than assume the rebate is an upfront discount.

Is there a November 30, 2026 deadline for Ontario heat pump rebates?

Kyro Mechanical is currently targeting November 30, 2026 for qualifying installations. This is Kyro’s installation scheduling target.

The published Home Renovation Savings heat pump rules do not clearly establish November 30 as the final deadline for either pre-approval applications or completed installations. The official sources reviewed for this article do not confirm that date as a program cutoff.

Ask Kyro to check the current requirements and your approval conditions before scheduling work. Applications need approval before work begins, so allow time for eligibility checks, pre-approval and installation.

If you’re considering a heat pump upgrade this year, contact Kyro early enough to review your options, determine eligibility and complete the application process.

Who qualifies for Ontario’s Home Renovation Savings heat pump rebate?

Eligibility depends on home ownership, the existing heating system, the property and the equipment being installed.

Generally, qualifying applicants must:

  • Own the home where the heat pump will be installed and be responsible for the project cost.
  • Live in an eligible residential property, such as a detached home, semi-detached home, townhouse or qualifying mobile home on a permanent foundation.
  • Have an eligible primary heating system, including oil, propane, wood, electric resistance or Enbridge-supplied natural gas.
  • Be connected to the Ontario electricity grid when applying through the electricity, oil, propane or wood heating categories.
  • Be installing a qualifying space-heating heat pump for the first time.
  • Use a participating HVAC contractor and receive pre-installation approval.

The public program page excludes new builds occupied for six months or less, while the detailed requirements say a home must have been occupied for at least six months. If your home is at that boundary, have the administrator confirm eligibility before proceeding. Replacements of existing space-heating heat pumps are also excluded under the current rules.

For the cold-climate air-source heat pumps discussed here, the model must be active on the applicable Natural Resources Canada qualified products list and meet the program’s efficiency requirements. Compatible indoor and outdoor components must meet the matching rules; certain "Coils Only" systems have specific exceptions.

Important information for Utilities Kingston natural gas customers

Not all Kingston homeowners qualify for the same provincial rebate. For homes primarily heated with natural gas, Ontario’s Home Renovation Savings heat pump program specifies Enbridge Gas customers.

If your home receives natural gas from Utilities Kingston instead, it does not currently qualify under that category.

Homes heated with electricity, oil, propane or wood may still qualify under the applicable program rules.

Kingston has offered separate incentives for Utilities Kingston natural gas customers through Better Homes Kingston, but that program is not currently accepting new applications.

Check which company supplies your natural gas before comparing heat pump incentives in Kingston.

Can you keep your natural gas or propane furnace?

Yes. In eligible natural gas or propane-heated homes, a qualifying heat pump can operate alongside a new or existing furnace. This is commonly called a dual-fuel heating system.

The heat pump provides heating and air conditioning under suitable conditions. The furnace can provide supplemental or backup heat when needed.

A dual-fuel system may be worth considering if:

  • Your existing furnace is still in good condition.
  • Your air conditioner needs replacement.
  • You want to add electric heating without completely removing your furnace.
  • You want to compare the operating costs of gas or propane heating with a heat pump.

Ontario’s rebate applies to the qualifying heat pump equipment, not the backup furnace itself. The equipment must be compatible, properly sized and approved under the program.

What about homes heated with oil, propane or electricity?

Homeowners purchasing qualifying systems for homes heated with these fuels can qualify for the higher cold-climate air-source rebate category, up to $7,500; rented systems are capped at $2,000. Installation requirements vary by existing fuel.

Propane-heated homes: A qualifying heat pump may be installed with a compatible propane furnace for backup heating. Equipment sizing and program requirements must still be satisfied.

Oil-heated homes: The heat pump and any required electric backup heating must be designed to replace the home’s oil heating load. The program requires work with a TSSA-registered contractor to maintain, empty and/or remove the oil tank, piping and associated components in accordance with applicable laws.

Electrically heated homes: A qualifying heat pump may provide more heating energy per unit of electricity consumed than conventional resistance heating. Existing electric backup heating may be retained where permitted.

Wood-heated homes: Qualifying installations must meet the program’s heating-load and distribution requirements.

The document called the Oil/Propane Tank Removal Attestation is not a blanket instruction to remove every tank. Both oil and propane applicants must sign it, but propane homes may retain a compliant hybrid system. Tank handling depends on the fuel, tank and applicable laws. Leave that work to a TSSA-registered contractor; do not drain, disconnect or remove a tank yourself.

For oil, wood and electrically heated homes, the air-source rules allow NRCan sizing options C or D, which emphasise heating. Eligible gas and propane homes may use options A through D. The installation must distribute heat throughout the conditioned space, including the basement where applicable.

The appropriate heat pump capacity depends on your home’s layout, insulation, existing equipment and winter heating needs.

Do you need a home energy audit?

No. Ontario’s standalone Home Renovation Savings heat pump rebate does not require a pre-installation or post-installation home energy audit.

Other Home Renovation Savings upgrades, such as certain insulation, window and air-sealing projects, may require energy assessments.

The heat pump program still requires equipment sizing information, documentation and written approval before installation.

Frequently asked questions about Ontario heat pump rebates

Can Kyro Mechanical submit my rebate application?

Yes. Kyro Mechanical is a participating Home Renovation Savings contractor and manages the Ontario heat pump rebate application process for customers. You provide the necessary information and signed documents; Kyro handles the required submissions.

Can I install a heat pump first and apply for the rebate afterward?

No. Pre-installation approval is mandatory. Installing the heat pump before receiving approval makes the project ineligible under the current program.

Does replacing an old heat pump qualify?

No. The current rebate is for first-time space-heating heat pump installations. Replacing an existing heat pump used for heating does not qualify.

Can I keep my existing furnace?

Yes, in qualifying natural gas or propane-heated homes. The heat pump must be compatible with the furnace and meet the program’s equipment and installation requirements.

Can landlords apply for the rebate?

Yes. An eligible property owner can apply for a qualifying rental property if the owner is responsible for the installation costs and all program requirements are met. Tenants cannot apply on behalf of their landlords.

Do I receive the full $7,500 rebate?

Not necessarily. The amount depends on your home’s eligible heating category and the heat pump’s rated heating capacity. The $7,500 is a maximum for the applicable category, not a flat payment for every installation.

How long does it take to receive the rebate?

The program indicates that rebate cheques should arrive within approximately 60 days after approval of the post-installation application. That does not include time for pre-approval, equipment installation or processing the final submission.

What if I heat with natural gas from Utilities Kingston?

Homes primarily heated with natural gas supplied by Utilities Kingston do not qualify for the current Home Renovation Savings natural gas heat pump category, which requires an Enbridge Gas account. Check directly with Utilities Kingston for any separate incentives.

Is this the same as the newly announced federal heat pump rebate?

No. Ontario’s Home Renovation Savings program is separate from the newly announced federal National Heat Pump Rebate.

The federal announcement describes up to $10,000 for eligible households below the median income and $2,000 for other eligible homeowners. The official campaign page calls the program upcoming and invites people to receive launch updates. The sources reviewed here do not confirm a 2027 application opening date or final application rules. Do not assume an Ontario installation will qualify retroactively or receive both rebates.

Read our separate article: New Federal Heat Pump Rebate: What Kingston Homeowners Need to Know.

Get started with an Ontario heat pump rebate in Kingston

If you’re considering replacing an aging furnace, upgrading your air conditioning or converting from propane, oil or electric heating, Kyro Mechanical can help you compare your options.

We provide heat pump installation and service in Kingston and surrounding communities, along with furnace installation and replacement.

As a participating Ontario Home Renovation Savings contractor, we handle the heat pump rebate application paperwork for you.

Kyro is currently targeting installations by November 30, 2026. If you’re considering an upgrade this fall, contact us early to discuss eligibility and installation scheduling.

Contact Kyro Mechanical to discuss your heat pump installation.

Call 613-449-8126

Information reviewed October 14, 2026. Rebate eligibility, application requirements, program availability and installation timelines are subject to change. Rebates are subject to approval by the program administrators.

Program sources